16/36
Siemens
Climatix HMI-DM
CB1P3916en02
Building technologies
Functions and operations
2015-07-02
4.3
Controller access
1.
On the following page of HMI-DM, select
Controller List
and then press key
ROLL
.
2.
It will detect all the connected devices automatically. If other devices are
connected to the HMI-DM via local connection, it will redirect to the following
page:
3.
If other devices are connected to the HMI-DM via process bus, it will display
the individual address and controllers’ names of all devices. The controllers
with submenu “
►” are accessible.
Label
Name
Description
①
Device name
Refer to the device name in process bus.
②
Individual address
Refer to the unique address allocated to a device
in process bus.
③
-----------------------
Refer to the situation If the device has not been
designated a name in process bus.
4.
Turn the knob of key
ROLL
to select one controller and press key
ROLL
to
confirm the selection. Then the communication between the HMI-DM and the
selected controller will be set up.
Controller access
operation
