Siemens CIM4 10 PROFINET FW V2 Series, Configuration, Page: 48 / 81

5 How to Work with the Library
5.3 Updating the library
HCS4x00Library
Entry ID: 109478117, V2.2.1, 09/2018
48

S
ie
m
e
n
s
A
G
2018
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
DiagnosticErrorInterrupt [OB82] / RackOrStationFailure [OB86]
The FB “LHcs4x00_Diag82” is called in diagnostic interrupt OB 82
“DiagnosticErrorInterrupt” and the FC “LHcs4x00_Diag86” is called in module rack
failure OB 86.
1.
Add the OBs “Diagnostic error interrupt” and “Rack or station failure” as new
organization blocks.
Figure 5-5
2.
Then drag FB “LHcs4x00_Diag82” into OB “DiagnosticErrorInterrupt” and
generate an instance data block for it.
3. Interconnect the interface parameters according to the specifications in Figure
4-4 .
4.
Drag FC “LHcs4x00_Diag86” into OB “RackOrStationFailure” and interconnect
the interface parameters according to the specification in
Figure 4-6 .
5.3 Updating the library
Below, you will find the steps of how to update your existing STEP 7 project with
the “LHcs4x00” V2.1 library to the latest version V2.2.
5.3.1 Updating the project objects
Below, the Integrating the library into STEP 7 (TIA Portal) is assumed.