Siemens Cerberus PACE Operating Manual Download Page 20

Page: 20 / 42

Operating elements in the system
Operating terminals

20 | 42
Building Technologies
Fire Safety

4.2 Operating terminals

System state indicator (door) PT2007-A1

● EN

messages

● Color

–
–
–
–

● Fault warning with acoustic warning signal
● Button for acknowledging acoustic warning
● Potential
● Design: Open frame

Remote control panel PT2006-A1

● Buttons and display for selecting channels

● Sound level settings
● Connection of up to 16 remote control panels to the digital audio matrices

PC2001

● Supplied with installation frame
● For installation in recessed box
● 4-pin cables for RS485 interface and power supply

System state indicator (19") PT2004-A1

● EN

messages

● Color

–
–
–
–

● Fault warning with acoustic warning signal
● Button for acknowledging acoustic warning
● Potential
● Design:

Alarm control panel (19") PT2005-A1

● Activation of voice alarms

–
–
–

● Display of system status
● Button to acknowledge faults: Black
● Pre
● Design: 19", 1

Operating elements in the system

Operating terminals

EN 54-16-compliant indicator panel for visual and acoustic status

messages
Color-coded visual indicators: Operation, fault, and alarm

Operation: Green
Fault: Yellow
Alarm: Red
Voice alarm: Red

Fault warning with acoustic warning signal
Button for acknowledging acoustic warning
Potential-free fault contact
Design: Open frame

Buttons and display for selecting channels
Sound level settings
Connection of up to 16 remote control panels to the digital audio matrices

PC2001-A1, PC2002-A1, or PC2003-A1 possible via the RS485 interface
Supplied with installation frame
For installation in recessed box

pin cables for RS485 interface and power supply

EN 54-16-compliant indicator panel for visual and acoustic

messages
Color-coded visual indicators: Operation, fault, and alarm

Operation: Green
Fault: Yellow
Alarm: Red
Voice alarm: Red

Fault warning with acoustic warning signal
Button for acknowledging acoustic warning
Potential-free fault contact
Design: 19", 1 HU

Activation of voice alarms

Activate: Red LED button
Reset: Black button
Silence: Green LED button

Display of system status
Button to acknowledge faults: Black
Pre-made cut-out for optional service socket
Design: 19", 1 HU

A6V10430571_en--_b

2018-07-19

for visual and acoustic status

coded visual indicators: Operation, fault, and alarm

Connection of up to 16 remote control panels to the digital audio matrices

possible via the RS485 interface

compliant indicator panel for visual and acoustic status

coded visual indicators: Operation, fault, and alarm

Summary of Contents for Cerberus PACE











































Search results

Summary of Contents for Cerberus PACE

Reviews:

Related manuals for Cerberus PACE

Brands by name

Popular brands

Siemens Cerberus PACE, Operating Manual

Search results

Summary of Contents for Cerberus PACE

Reviews:

Related manuals for Cerberus PACE

Brands by name

Popular brands