Siemens BA 2030 SERIES, Operating Instructions Manual

Page: 161 / 166

BA 2030
Operating Instructions, 11/2017, A5E37880173A/RS-AE
159
Declaration of incorporation, declaration of
conformity
12
12.1 Declaration of incorporation
Document No. A5E36963968AC
Declaration of Incorporation according to Directive 2006/42/EC Annex II 1 B.
Manufacturer: Siemens AG
Division Digital Factory DF MC
Address: Bahnhofstraße 40, 72072 Tübingen, Germany
Product designation: SIMOGEAR gearboxes with adapter K
• Single-stage helical gearboxes E. 39 - 149
•
Three- and two-stage helical gearboxes D./Z. 19 - 189
• Parallel-shaft gearboxes F. 29 - 189
•
Bevel gearboxes B. 19 - 49, K. 39 - 189
• Helical worm gearboxes C. 29 - 89
The designated product is an incomplete machine in the sense of Article 2 g of
Directive 2006/42/EC. It is designed exclusively for incorporation into another machine or for
assembly with one or more other machines.
The following essential safety and health requirements of Directive 2006/42/EC, Annex I, are
applied for the incomplete machine specified above and are complied with. The risks not
relevant for the product are not listed.
• 1.1.1, 1.1.2, 1.1.3, 1.1.5 • 1.2.4.4, 1.2.6 • 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.6, 1.3.8.1
• 1.4.1, 1.4.2, 1.4.2.1 • 1.5.1, 1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.8, 1.5.9, 1.5.10, 1.5.11, 1.5.13, 1.5.15
• 1.6.1, 1.6.2 • 1.7.1, 1.7.1.1, 1.7.2, 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3
When developing and manufacturing the above designated product, the following standards
and specifications were applied: EN ISO 12100-1: 2011
The special technical documents according to Annex VII, B of the Directive 2006/42/EC were
generated and will be provided to the appropriate authorities when justifiably requested in an
electronic form.
The named person for compiling the technical documents:
Georg Böing, Head of Research & Development
Before the final product is commissioned, in which the incomplete machine described here is
to be incorporated, it must be ensured that this is in conformance with Directive 2006/42/EC.
Tübingen, July 1, 2017
Georg Böing
Head of Research & Development
Florian Hanisch
Vice President Lead Factory Simogear