Siemens AXIOM Iconos R200 Operator'S Manual Download Page 99

Page: 99 / 238

Examination

Cassette Exposures in the Spotfilm Device (optional)

AXIOM Iconos R200

AXD3-340.620.13.01.02

/ 52

Full format (no segmentation)

Segmentation 2 on 1

Segmentation 3 on 1

Segmentation 4 on 1

Format segmentation

Skipping a segmentation segment

◆

Press the selected segmentation key once again, if you wish to skip a seg-
ment during exposure.

Mixed mode

It is possible to change the segmentation within a cassette as long as the unex-
posed part of the cassette permits the newly selected segmentation.

If you have selected a segmentation program which cannot be obtained with the
inserted type of cassette, then the LEDs in the keys for the selected segmenta-
tion program flash.

If "0" is displayed in the display after the exposure, the selected program has
been completed.
Further exposures are then blocked.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 99 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: