manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 82 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 82

System Operation

Setting the Image Geometry

30 

/ 32

AXD3-340.620.13.01.02

Operator Manual

Additional Cu filter

The organ programs determine which additional Cu filter is moved into the beam 
path on selection of the program.

A temporary change of the automatic additional Cu filter selection with organ pro-
gram is possible by manual switchover. The manually selected additional Cu filter 
is maintained until renewed switchover or selection of an organ program with 
configured additional Cu filter.

The currently selected additional Cu filter is displayed on the control units and pri-
mary collimator.

Image reversal

You can mirror the images on the image monitor horizontally or vertically with 
these 2 keys. If none of the keys is pressed, then the image is displayed in the 
normal position.

Image mirrored horizontally / vertically

Warning

It is part of the user’s duty to pay attention to the correct 
orientation of the display on the monitor. Use suitable aids for this, 
e.g. Pb letters.

Electronically displayed right/left markings are not mirrored when the image is
reversed.

A faulty diagnosis is possible due to incorrect position information, e.g. confu-
sion between right and left, with legal consequences and under certain circum-
stances with severe consequences for the patient.

R

R

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments