manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 61 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 61

AXIOM Iconos R200

AXD3-340.620.13.01.02

9 

/ 32

System Operation

Functional and Safety Check

Daily tests

After switching the system on

◆

Perform a visual inspection of all displays and signal lamps on the operating 
units.

No errors should be indicated.

Neither the radiation ON indicator on the operating units nor the radiation warning 
lamp in the room should light up.

Use exclusively foot switches from SIEMENS (original parts with approval) for ra-
diation release.

Prior to the examination

◆

Remove unnecessary objects and equipment from the area of action of the 
system.

◆

Remove unnecessary accessories from the system accessory rails and the 
primary collimator.

◆

Attach the devices required for patient positioning and immobilization secure-
ly to the system.

◆

Attach all safety-related accessory parts correctly (e.g. footboard, grip protec-
tion strip, handgrip, handgrip strip) and make sure they are properly secured.

◆

Clean any contrast agent residues from the patient table, protective plate and 
spotfilm device cover.

Recommendation:

As a test, take a full-format exposure using the largest possible format.

Warning

If the radiation ON indicator or a radiation warning lamp lights up, or a live fluo-
roscopic image (not LIH) appears on the monitor without actuating a switch

◆

immediately switch the X-ray system off using the emergency shutdown 
button and

◆

notify the SIEMENS Uptime Service.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments