manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 25 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 25

System Overview

Protective Measures

AXIOM Iconos R200

AXD3-340.620.13.01.02

17 

/ 44

Grip locations

The following grip locations are provided:

❏

1 handgrip (front)

❏

Grip protection strip (head end)

❏

Handgrip strip (back)

◆

Ensure that the handgrip strip, the grip protection strip and the handgrip are 
always attached.

If these grip locations cannot be used:

◆

Pay special attention to the stated possibilities of crushing between moving 
parts and their guide openings.

◆

Ensure during the examination that the patient under no circumstances holds 
on to the edges of the patient table.

Not intended as gripping point:

The handle for turning the tube assembly must not be used as grip location or 
hold for the patient.

Danger zones

The dotted areas mark the danger zone, where no objects must be located during 
tilting.

◆

Prior to activating any movements of the unit, especially tilting of the unit, 
make sure that there are no objects such as stairs, steps, stands, waste con-
tainers, instrument tables, beds, gurneys, monitor support systems, operat-
ing consoles or the like in its movement range.

Warning

When handling the system correctly as well as when positioning the patient, 
operators and patients should use only the grip locations 
provided for this purpose.

Movement range of the positioning table

Danger zone

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments