manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 221 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 221

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

49 

/ 54

Radiation protection for the upper body

General

The radiation protection window is used to reduce exposure of the examiner’s 
upper body to scattered radiation. It is especially intended to decrease the expo-
sure of their eyes and thyroid to radiation.

The radiation protection window is 

not

 designed to support additional loads! This 

means it is not suitable to carry any additional weight.

The radiation protection window can be moved in any direction.

Components

The radiation protection for the upper body comprises the following parts:

❏

Ceiling rail

❏

Carriage with stand

❏

Support arm with window pane 

❏

Brake handle with brake shoe

Lead equivalent

The lead equivalent value is 0.5 mm (according to DIN 6813).

Handling

◆

The radiation protection window should be positioned so that it protects the 
examiner’s eyes and thyroid.

Positioning

If the radiation protection window is mounted on the ceiling rail and can be 
moved, it is positioned using the brake handle on the stand of the carriage.

Releasing the brakes

◆

Pull brake handle (1).
– The carriage can now be moved freely in the ceiling rail.

◆

Set it to the required position.

Warning

Danger of collision!

There is a risk of collision or damage due to breaking off or falling down espe-
cially during swivel movements.

◆

Avoid possible collisions during system movements!

(2)

(1)

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments