Siemens AXIOM Iconos R200 Operator'S Manual Download Page 214

Page: 214 / 238

Accessories

Optional Accessories

/ 54

AXD3-340.620.13.01.02

Operator Manual

Information on the

possibility of wear

In addition to “

Accessories

", please note the following information concerning

the possibility of wear on

BABIX cradles

and their

immobilizing straps

❏

After prolonged use, cracks may form in the PVC plastic material.

❏

The immobilizing straps may show wear.

◆

Following a visual check, the defective parts have to be replaced, if necessary,
or the entire BABIX cradle has to be disposed of.

❏

The tensile/shear strength of the welded chains, brackets and fittings has
been designed so as to ensure a safety factor of 20.

◆

If any external damage can be seen on these parts, they must be replaced.

Cleaning

❏

The BABIX cradles can be cleaned using commercially available detergents
and disinfectants.

BABIX hanger

Use

Storing and tensioning the BABIX cradle

There are BABIX hangers for every BABIX cradle shape and every cradle length

Caution

Do not use chemical-based solvents!

Summary of Contents for AXIOM Iconos R200















































































































































































































































Search results

Summary of Contents for AXIOM Iconos R200

Reviews:

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 214 / 238

Search results

Summary of Contents for AXIOM Iconos R200

Reviews: