manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 212 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 212

Accessories

Optional Accessories

40 

/ 54

AXD3-340.620.13.01.02

Operator Manual

BABIX cradles

Application

For pediatric examinations with the patient table in the vertical or horizontal posi-
tion.

The BABIX cradles are made of transparent, radiolucent plastic.
They are available in 2 shapes:

BABIX-U: 
Is suitable for examinations on the tilted to vertical tabletop in which the body of 
the infant must be firmly enclosed in a straight posture. 
Only in connection with the holder for BABIX cradles. 

BABIX-Flat:
This shape is suitable for pelvic and spinal examinations. The flat cradle can be 
placed safely on the table in the horizontal position.
The infant can be secured above and below the knees through the slit in the back 
of the cradle.
The infant can be secured in the abdominal region through slits at the sides.

Use the rubber or Velcro tapes provided for immobilizing infants.

Warning

There is a danger of rolling away when placed down on the horizontal table.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments