manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 210 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 210

Accessories

Optional Accessories

38 

/ 54

AXD3-340.620.13.01.02

Operator Manual

Holder for BABIX cradles

Application

For pediatric examinations using BABIX cradles with the patient table tilted or in 
the vertical position

Attachment

◆

Move the patient table to the horizontal position;

◆

Slide the BABIX holder with the hook along the front or rear accessory rail to 
the center of the patient table and move it to the exposure position;

◆

Tighten the cap screw;

◆

Pull and push the holder to ensure that it is seated properly;

Warning

Tighten the cap screw and ensure that it is secure. Remember that the BABIX 
holder is the sole means of support for the hanging BABIX cradle. Securing the 
cap screw properly ensures that the BABIX holder will not slide down the ac-
cessory rail, thereby avoiding injury to the patient and equipment damage.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments