manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 195 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 195

Accessories

Optional Accessories

AXIOM Iconos R200

AXD3-340.620.13.01.02

23 

/ 54

Foot restraint

Application

Safety device for patients in Trendelenburg examinations to relieve the 
pressure on the spinal column

At a Trendelenburg position >40°, the foot restraints must be used in addition to 
the shoulder supports. The maximum patient weight must not exceed 180 kg.

The maximum patient weight must not exceed 150 kg at a Trendelenburg posi-
tion >45°.

Attachment

◆

Move the patient table to the horizontal position.

◆

Push the footboard into the working position.

◆

Check that the footboard is locked by pulling on it.

◆

Position the patient in the prone or supine position with his/her feet on the 
footboard.

◆

Attach the foot restraint snugly around the ankles.

◆

Tighten the straps.

Warning

If you are using only the foot restraint to secure the patient on the patient table, 
the locking metal clip is the only device preventing the patient from slipping or 
falling. For this reason, you must check that the metal clip of the foot restraint 
is securely locked into the footboard. Have the patient hold onto the handgrips 
during this examination procedure.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments