manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 19 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 19

AXIOM Iconos R200

AXD3-340.620.13.01.02

11 

/ 44

System Overview

Protective Measures

Emergency Procedures

Cleaning and disinfection

Warning

Due to the complexity of the system, the loss of X-ray imaging or other system 
functions during an examination or procedure can not be completely excluded.

Risk of failure during interventions

◆

Consider therefore the need to establish emergency procedures in such cas-
es.

Caution

Use of harsh cleaning agents, liquids or sprays.

Risk of electrical hazard or damage to the system

◆

Use only substances for cleaning and disinfection, which are recommended.

◆

Do not let cleaning liquids seep into the openings of the system 
(e.g. air openings, gaps between covers).

◆

Observe the following cleaning and disinfection instructions.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments