Siemens AXIOM Iconos R200, Operator'S Manual, Page: 182 / 238

Accessories
Standard Accessories
10
/ 54
AXD3-340.620.13.01.02 Operator Manual
Footboard
Attachment Positioning aid for examinations of patients when standing or sitting and for ad-
ditional use with the foot restraints for recumbent patients in Trendelenburg po-
sition.
The maximum permissible patient weight on the footboard is 180 kg.
Attachment ◆ Move the patient table to the horizontal position;
◆ Hold footboard laterally on the handgrips and press the spring-loaded handgrip
strips in the handgrips;
– the two red buttons (1) must be visible;
◆ Insert the footboard anywhere in the acccessory rail at any place of the table-
top in the head/foot range, first on one side and then on the other;
◆ Move the footboard to the desired position (lock-in position);
◆ Release the handgrip strips and shift the footboard slightly back and forth until
it locks in;
– the two red buttons must be flush with the handgrip;
◆ Check that the footboard is locked by pulling on it;
◆ Position the patient.
1
The footboard can also be attached to the head end of the patient table, if the
patient has to be turned for positioning (right head end).
3 lock-in positions each at the head end and foot end at a distance of 20 cm each
are available.