manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 178 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 178

Accessories

Standard Accessories

6 

/ 54

AXD3-340.620.13.01.02

Operator Manual

Removal

◆

Move the patient table to the horizontal position;

◆

Loosen the cap screws;

◆

Remove the grip protection strip from the accessory rail.

Handgrip strip

Application

Handgrip strip for mounting on the front or back accessory rail to assist in posi-
tioning the patient

Attachment

◆

Move the patient table to the horizontal position;

◆

Loosen the right and left cap screws (1) on the handgrip strip;

◆

Insert the handgrip strip in the accessory rail and push it into position;

Warning

The grip protection strip is intended for the safety of the patient in the prone po-
sition. To prevent injury to the hands when moving the tabletop, make sure that 
the patient uses the grip protection strip and not the head end or the side edge 
of the tabletop.

1

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments