manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 176 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 176

Accessories

Preliminary Remarks

4 

/ 54

AXD3-340.620.13.01.02

Operator Manual

❏

turn toward the right 

means tighten accessory with knurled screws or

levers (clockwise)

❏

turn toward the left 

means remove accessory with knurled screws or levers 

or other fastening devices (counterclockwise)

Example:

◆

Turn both knurled screws toward the left

◆

Push the grip protection strip on the head end into both accessory rails

◆

Turn both knurled screws toward the right

◆

Check that the grip protection strip is seated securely

Use of several accessory components

This document describes the use of a single accessory component in each chap-
ter text.

If you need to work with several components during an examination, e.g. com-
pression belt and shoulder supports, these components must be attached and re-
moved in the correct sequence because most

1

 accessory components are 

attached to the patient table using the accessory rails.

Example:

❏

Grip protection strip and footboard are already attached to the patient table.

❏

You need the shoulder supports in addition because they will be helpful for 
the examination.

◆

First, you must remove the grip protection strip as described in these instruc-
tions.

◆

Then position the patient on the table.

◆

Next attach the shoulder supports.

◆

Next push the grip protection strip back into the accessory rails and secure it.

◆

Check that all accessory components are securely attached.

1

Exceptions: compression belt, lateral cassette holder, arm rest

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments