manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 135 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 135

AXIOM Iconos R200

AXD3-340.620.13.01.02

51 

/ 52

Examination

Cassette exposures with wall stand

Collimation during exposure

With the table vertical and 180° rotation of the tube assembly, the automatic for-
mat collimation of the system switches over automatically 

❏

to the “ACSS Mode” (with automatic format collimation) if using a wall stand 
with automatic format collimation (option) 

❏

to the “Manual Mode” (without automatic format collimation) if using a wall 
stand without automatic format collimation 

Selecting the exposure technique

◆

Select the “wall stand” system at the integrated generator control console

◆

Set the table to a vertical position

◆

Set the tube assembly to a source-image distance of 115 cm or 150 cm.

◆

Turn the tube assembly horizontally onto the wall stand

◆

Place the cassette in the Bucky

◆

Position the patient in front of the wall stand

◆

Set the wall stand to the object height

◆

Adjust the tube assembly to the object using the full-field light localizer and 
positioning laser

◆

Collimate in relation to the object

with automatic format

collimation(option)

The radiation field is automatically set to the cassette format and can then be col-
limated as small as required in relation to the object.

without automatic for-

mat collimation

There is no limitation of the radiation field and collimation must be performed in 
relation to the object using the full-field light localizer.

◆

Select measuring field

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments