manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 134 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 134

Examination

Free Cassette Exposure

50 

/ 52

AXD3-340.620.13.01.02

Operator Manual

Releasing an exposure

❏

To release the exposure, actuate the exposure release button on the genera-
tor ON/OFF console.

❏

Before every exposure release check:
– the format limitation with the aid of the light localizer on the collimator
– the set SID with the tape measure on the collimator
– the central ray on cassette center with the aid of the laser line light localizer 

on the collimator.

❏

The radiation ON indicators must light up.

For safety reasons, radiation cannot be released from the system control con-
sole or the footswitch in this mode.

Warning

If these radiation indicators light up although no switch has been actuated :

◆

Switch the system off immediately!

◆

Notify the SIEMENS Uptime Service.

◆

Discontinue operation of the system.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments