manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 13 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 13

AXIOM Iconos R200

AXD3-340.620.13.01.02

5 

/ 44

System Overview

System Description

Application

The ICONOS R200 is an X-ray system for universal use and is suitable both as 
intensively used universal workstation and as a highly loaded special workstation.

You can perform examinations with the following techniques:

❏

Fluoroscopy through image intensifier and television system

❏

Cassette exposures with spotfilm device (optional)
– Spotfilms
– Bucky exposures
– Tomography (optional)

❏

Digital radiography DR
– Spotfilms
– Tomography (optional)
– Periscanning
– Peristepping (optional)
– DR scanning (optional)
– Digital subtraction angiography (optional)

❏

Tabletop cassette exposures

❏

Bed-side exposures

❏

Exposures onto the wall stand (optional)

Product description

ICONOS R200 universal X-ray diagnostic unit with swivelling overtable X-ray tube 
assembly, oblique projection and tomography in all table positions and gently 
starting and braking system movements.

Two-stage setting of the source-image distance.

Table tilt + 90° to - 17° with soft start and braking.

Motor-driven longitudinally and transversely moving tabletop.

Fully automatic spotfilm device with extensive subdivision program and 33 cm or 
40 cm image intensifier or I.I. image receptor with 40 cm image intensifier, each 
with a large axial travel range.

Fluoroscopy and imaging system with ergonomic remote control.

Integrated system movement control on the spotfilm device.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments