manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 118 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 118

Examination

Digital Radiography

34 

/ 52

AXD3-340.620.13.01.02

Operator Manual

Peristepping (optional)

General

Peristepping comprises the following phases:

❏

Programming run

❏

Filling run (native)

Peristepping is selected after the patient has been positioned, the catheter has 
been placed and the system settings for aorto-arteriography have been per-
formed.
With this selection the X-ray system can be moved only longitudinally in steps 
and the transverse movement is automatically blocked.

Peristepping is possible in all unit positions and in the axial direction, both to-
wards the head end and towards the foot end.

The step length per step is 18 cm with I.I.40.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

6.

Starting position 

X-ray system

End position 

X-ray system

Position

Step

Programming run

Filling run

Injector triggering

Move X-ray system

into starting position

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments