Home
/
Siemens
/
AXIOM Iconos R200
/
Operator'S Manual

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 106 / 238

Share

Page: 106 / 238

Siemens AXIOM Iconos R200 Operator'S Manual Download Page 106

Examination

Cassette Exposures in the Spotfilm Device (optional)

22

/ 52

AXD3-340.620.13.01.02

Operator Manual

Tomographic sequence

◆

Press the exposure release button up to the first pressure point.
– The tube assembly stand moves to the head-end tomography starting posi-

tion (at the left with the unit horizontal).

◆

Give the breathing command to the patient.

◆

Press the exposure release down fully and keep it pressed until the tube as-
sembly stand stops in the foot-end position.
– During the exposure the tube assembly stand moves towards the foot end

and automatically remains there following the exposure.

Prepare the next tomographic exposure:

◆

Set a new tomographic height.

◆

Press the exposure release button up to the first pressure point.
– The tube assembly stand moves from the foot-end position towards the

head-end tomography starting position (at the left with the unit horizontal).

With the exposure release button pressed, the tube assembly stand moves back
into the starting position.

«
...
104
105
106
107
108
...
»

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments