manualshive.com logo in svg

Siemens AXIOM Iconos R200, Operator'S Manual, Page: 103 / 238

Share
Download
Siemens AXIOM Iconos R200 Operator'S Manual Download Page 103

Examination

Cassette Exposures in the Spotfilm Device (optional)

AXIOM Iconos R200

AXD3-340.620.13.01.02

19 

/ 52

Releasing the exposure

❏

Release the exposure with the exposure release button in the system remote 
control console or via the foot switch in the control room, or table-side (op-
tion). The foot switch has no precontact.

❏

The signal lamps for radiation must light up briefly.

Organ programs

All parameters necessary for the exposure are stored in organ programs.

➩

Refer to the 

POLYDOROS SX

 register for further details on the organ 

programs and their programming.

Single exposures / serialography

Single exposure

Single exposure selected: the LED does not light up

◆

Select a suitable segmentation program. Possible selection:
– Full format
– Segmentation 2 on 1 / 3 on 1 / 4 on 1

If you now release the exposure, you receive one single exposure per exposure 
release.

Warning

If these radiation ON indicators light up although no switch has been actuated 
and the current fluoroscopic image cannot temporarily be seen on the monitor:

◆

Switch the system off immediately!

◆

Notify the SIEMENS Uptime Service.

◆

Discontinue operation of the system.

Summary of Contents for AXIOM Iconos R200















































































































































































































































Reviews:

No comments