manualshive.com logo in svg

Siemens as-interface ANALYSER 3RK1 904-3AB01, Manual, Page: 34 / 46

Share
Download
Siemens as-interface ANALYSER 3RK1 904-3AB01 Manual Download Page 34

                          

   

         

AS-Interface Analyser 

Functions of the Analyser

s

Subject to reasonable modifications due to technical advances.

Printed in Germany

SIEMENS AG  ·  Low-Voltage Controls · Phone +49 911 895 59 00  ·  Fax +49 911 895 59 07  ·   Internet: http://www.siemens.com/lowvoltage/technical-assistance

iss

ue da

te

 23.

8.

2006

34

5.7.9

Storage and Offline Working on Traces

Traces can be stored and are available off-line for subsequent evaluations, con-
trols, and comparisons or documentation.

Storing

 can occur in two ways:

• with "Save Trace" (extension *.trc): The trace is stored in a analyser format. It 

can be opened and processed with the analyser software afterwards.

• with "Trace Export (extension *.tsv): The trace is stored in a "tabulator separated 

value" format. So it can be exported into an Excel sheet.

Opening

: You can "open" a stored trace off-line by a click on the appropriate file. 

If due to a track view filter only a part of the data packets have been displayed, this 
reduced view is displayed when opening a stored file first. In the background 
however, the entire trace is present and can be represented by a change of the 
trace view filter. Furthermore the last used settings for trigger and recording filter 
are stored and can be used for the data analysis as well.

With the export of a *.tsv-file in Excel data formats are queried. The following set-
tings are recommendable: "separated" for the data type, "Tab stop" for separators, 
" as text recognition characters and "text" as data format for 

all

 columns. If due to 

a trace view filter only a part of the data packets have been displayed at the mo-
ment of storing this reduced view appears in Excel. The rest of the file cannot be 
represented. However that solves another problem: Excel can represent only a li-
mited number of lines. Due to a view filter the trace can be reduced in such a way 
that it is representable in Excel (In the last column the content of all lines is repea-
ted in a hexadecimal form for a second time).

Summary of Contents for as-interface ANALYSER 3RK1 904-3AB01















































Reviews:

No comments