Siemens Ardoptix PT 140 AF1, Operating Manual, Page: 44 / 68

s
Operating manual
36
Temperature data format
two-colour/ratio Lambda 1
– Lambda 2
(one cycle):
Byte Negative Temperature Positive Temperature Temperature exceeds
measuring range
Temperature falls below
measuring range
1 Space Space Space Space
2 Minus symbol - Space Minus symbol - Minus symbol -
3 Digit 1000 Digit 1000 O U
4 Digit 100 Digit 100 V N
5 Digit 10 Digit 10 E D
6 Digit 1 Digit 1 R E
7 Decimal point . Decimal point . Space R
8 Decimal place Decimal place Space Space
9 Space Space Minus symbol - Minus symbol -
10 Unit C or F Unit C or F Space Space
11 Tabulator Tabulator Tabulator Tabulator
12 Space Space Space Space
13 Minuszeichen - Space Minus symbol - Minus symbol -
14 Digit 1000 Digit 1000 O U
15 Digit 100 Digit 100 V N
16 Digit 10 Digit 10 E D
17 Digit 1 Digit 1 R E
18 Decimal point . Decimal point . Space R
19 Decimal place Decimal place Space Space
20 Space Space Minus symbol - Minus symbol -
21 Unit C or F Unit C or F Space Space
22 Tabulator Tabulator Tabulator Tabulator
23 Space Space Space Space
24 Minuszeichen - Space Minus symbol - Minus symbol -
25 Digit 1000 Digit 1000 O U
26 Digit 100 Digit 100 V N
27 Digit 10 Digit 10 E D
28 Digit 1 Digit 1 R E
29 Decimal point . Decimal point . Space R
30 Decimal place Decimal place Space Space
31 Space Space Minus symbol - Minus symbol -
32 Unit C or F Unit C or F Space Space
33 Carriage Return Carriage Return Carriage Return Carriage Return

The cycle time in which the temperature reading is transmitted can be
set via parameter
ACYC
(minimum cycle duration is 0.1 second).
19.4 User Recalibration
If ever required, the pyrometer can be recalibrated. Go to Submenu Cali-
bration. Press command „K“ and then enter the password „100“ to ac-
cess the calibration menu.
All signs/symbols are ASCII coded; preceding zeros will be
transmitted