Menus
79
WAP Settings
Allows you to make settings for the WAP servers of six different
network operators, and select the server that you would like to use
when connecting to the Internet. By scrolling to a particular group of
WAP server settings that you wish to modify, and then pressing
>
(
Option
), you can create a new group of settings, edit the
settings, or delete the settings.
WAP server settings include the fields listed below. Press
>
(
Edit
)
to edit the setting in each field.
•
Profile Name
: Gives the WAP server settings a name.
•
Homepage
: Sets the webpage that the browser will link to when it
is started up.
•
IP Address
: Enter the IP address used for accessing the mobile
Internet.
•
Port
: Enter the connection port specified by the network operator
– for example, 9201.
•
Bearer Mode
: Before connecting to the Internet, you must set this
item according to whether your Internet connection bearer mode
is a GPRS network system or a GSM dialup network. Doing so will
allow you to properly link to the data network to browse WAP
pages. If you are using a GPRS network, you can use both the
GPRS and dialup network to connect to the Internet. If, however,
you are using a dialup network, you are restricted to using only the
dialup network to connect to the Internet.
GPRS
/
CSD
: Use the GPRS network preferentially. Only if
there is no GPRS network present will the dialup network be
used.
GPRS
: Use only the GPRS network.
AP75.book Seite 79 Freitag, 18. November 2005 11:48 11
