Siemens AlgoPilot B3Q661, Operating Instructions Manual

Page: 8 / 140

General information
i
8
Building Technologies A6V10225450_b_en_--
Fire Safety 2017.09.07
About this document
Purpose
This document describes how to operate the AlgoRex CS1140 system.
Scope
The document contains information about the terminals B3Q661, B3Q681 and B3Q686, and
applies to software versions EP7F.
Target audience
This documentation and the instructions contained therein are intended for the following groups
of persons, who perform specific tasks and have the necessary qualification.
Group of persons Activity Qualification
Installation personnel
They install product, device or
system components on site.
and subsequently carry out a
general performance check. Professional training in the
field of building automation
or electrical installations.
Commissioning personnel
They configure the product,
device or system in accord-
ance with the customer's -
specification on site.
Check the product operability
and release the product, sys-
tem or device for use by the
operator / customer.
They are also responsible for
trouble-shooting. They have had the training
appropriate to his/her func-
tion and to the products,
devices and systems to be
commissioned and have at-
tended the technical train-
ing courses for commis-
sioning personnel.
Maintenance personnel
They undertake all the mainte-
nance work listed in the prod-
uct documentation and check
everything is functioning per-
fectly. They have had training ap-
propriate to the function
and product.
Operating personnel
They only carry out procedures
which ensure that the product,
device or system runs correct-
ly. They can read and under-
stand the instructions in the
documentation labeled as
"Operation".
No particular basic training
is required, they may have
to be instructed by experts.
Training
Siemens offers the product training required. You will find information about the training mod-
ules on the Siemens Intranet. If you cannot access this, please contact your Siemens partner.