Siemens AlgoPilot B3Q661, Operating Instructions Manual

Page: 14 / 140

Operating instructions Œ•Ž
14
Building Technologies A6V10225450_b_en_--
Fire Safety 2017.09.07
Status and configuration dependency
What impact
does this have?
The menus depend on the configuration , system status and authorization level , i.e. they may dif-
fer slightly from the illustrations used in this manual.
Likewise some of the operating stages depend on the current system status and configuration .
Example
The example below should demonstrate this dependency on status:
For example, a softkey may be labeled as follows
<Zone -> OFF>
when the corresponding zone is switched ON
The labeling changes to
<Zone -> ON>
when the corresponding zone is switched OFF
The softkey can also be used to call up a sub-menu when mixed statuses arise.
At section level, a softkey can have the following meaning for example:
<All DETECTOR zones -> OFF>
when all zones are switched ON
or
<All DETECTOR zones -> ON>
when all zones are switched OFF
This softkey changes to
<DETECTOR zones ON/OFF functions..>
when not all zones
are in the same status.
It calls up a sub-menu using the following softkeys
<All DETECTOR zones -> OFF>
in order to switch all zones OFF
<All DETECTOR zones -> ON>
in order to switch all zones ON