Setup
26
©
Sie
m
en
s A
G
20
04,
C:\D
aten
_itl\Ben
Q
Mobi
le
\DTP
-Satz\Produkte\A
F51_
QUA
IL_3
\o
ut-
left page (26)
of AF51, Quail, FUG, dtc 143mm, en, A31008-H2950-A1-3-7619 (10.03.2006)
VAR Langua
ge: en; V
A
R issue
date: 050711
Colour scheme
Select colour scheme for the entire user
interface.
Screensaver
The screensaver shows a picture in the
display when a period set by you has
elapsed. An incoming call, pressing any
key or opening the clamshell will end the
function except if the safety function is
activated. With code protection, the PIN
must be entered.
Start up anim.
Shown when phone is switched on.
Shutdn anim.
Shown when phone is switched off.
Own greeting
Enter greeting to be displayed when
phone is switched on.
Big letters
You can choose between two font sizes
for the display.
Illumination
Set display illumination to brighter/
darker. The darker the setting the longer
the standby time.
Dynamic light
§Menu§
¢
m
¢
Dynamic light
¢
Select function.
Two LEDs for
Dynamic light
are located
under lift cover.
It is used to indicate visually different events
and functions, as well as the current
phone status (e.g. network searching).
You can determine the visual signal (LEDs)
on the phone for certain functions and
events. The LEDs then flash in different
rhythms depending on the current func-
tion.
Show light effects
This enables you to switch the visual
signal on and off centrally for all
functions and events.
Play demo
All flash rhythms are displayed in
sequence. End with
§Cancel§
. Show next
flash rhythm with
§Next§
.
Group calls
You can assign different flash rhythms
to each group.
More light...
Set the flash rhythm for other functions
or events.
Call setup
§Menu§
¢
m
¢
Call setup
¢
Select function.
Hide ID
b
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service providers).
Call waiting
b
If you are registered for this service, you
can check whether it is set and you can
activate/deactivate it (see also p. 12).
Divert
b
You can specify when calls should
be diverted to your mailbox or other
numbers.
Set up call divert (example):
The most common condition for call
divert is, for example:
•
All Unanswered
Includes the conditions
Not reachable
,
No reply
,
Busy
, see p. 27.
