Siemens ADVIA 1800, Operator'S Manual, Page: 91 / 222

System Overview 91
In the middle of the sample tray display, the tray (TT) number for the current run displays
in the TT No. list box. If this is a barcode analysis, the TT number is 0.
To view the status of prior tray samples that are still in process, select the down arrow of
the TT No. list box, then select the number of the tray you want to view.
Result data information
The right side displays result data for the sample most recently processed.
NOTE: Some results may not display because of limits in the display area.
•
Each sample is identified by sample number, tray and position number, sample type,
and dilution factor.
•
The tests performed are listed with their result values.
•
If real time print parameters have been set, results print as they become available.
•
A result may indicate that a special circumstance was found. For example, if sufficient
sample was not available, the "s" flag displays in the results.
Using the Sample Log
1. At the Menu Panel, select Request , then select Sample Log .
2. Perform any of the following tasks at this window:
•
view the sample log entries
•
search the sample log
•
delete a specific sample log entry
•
delete all sample log entries
•
print a list of the sample log entries
•
export the sample log entries
3. Close the window.
Viewing the sample log entries
1. In the list box, select the file containing the sample log entries you want displayed.
The file for the current day is selected automatically.
2. Select the types of sample entries you want to display:
•
Select
ALL
to view all sample entries.
•
Select
Routine/Ctl
to view patient and control sample entries.
•
Select Routine Only to view patient sample entries.
The following information is provided for each sample log entry:
Asp Date and Time External Type
STT SampleID Rerun
CTT Description Results
3. To view entries for recently aspirated samples, select
Update
.