Siemens ADVIA 1800, Operator'S Manual, Page: 81 / 222

System Overview 81
Creating a profile
1. At the Menu Panel, select Request , then select Order Entry .
2. Select Create Profile .
3. In the Profile set no. box, enter the profile number (1 to 150).
4. In the Comment box, enter appropriate text.
Because the first 8 characters are used to identify the profile on the Order Entry window,
you can use these characters for the profile name, and the remaining space for any
additional information.
5. Select Test table .
6. Select each test you want in the profile, then select
Return
.
Select buttons below the Test table to get more tests.
7. Select
Execute
.
Creating a load list
NOTE: A load list contains only workorders that have position numbers. To include
workorders currently without position numbers, use Creating List.
1. At the Menu Panel, select Request , then select Order Entry .
2. Select Create List .
3. Select
All
or, if you want to specify a range of position numbers, select
Posi.no
.
4. If you selected Posi.no. , define the tray and cup position.
a. In the Last no. entry format area, select the means of determining the last sample
in step 4c.
b. In the Start no. box, enter the position number for the first sample in the load list.
c. In the Last no. box, enter the position number for the last sample in the load list or
type the number of samples you want in the load list.
5. Select
Execute
.
The system creates the load list and displays it at the
Worksheet
window.
6. To print the load list, select
Print
.