Siemens ADVIA 1800, Operator'S Manual, Page: 59 / 222

System Overview 59
NOTE: This window is intended to be used when two controls are run for each test.
However, you can still use this window if you are running only one control.
Daily Precision Control window
Use this window to view daily control results.
CAUTION
Tests on the Daily Precision Control window must be in the same order as they
display at the System Test List window to avoid incorrect positioning of results.
Do not modify the order of the test names at the System Test list window after the
initial setup. If you reposition any test names on the System Test List window after
initial setup, results for samples already run could be associated with the wrong test
name.
NOTE: The maximum number of results displayed in the Daily Precision Control window
is 200. When this number is reached, the system deletes the results starting from the first
entry and adds new results after the latest entry. The system does not display a message
that the maximum number of results was reached.
Perform any of the following tasks at this window:
•
view the Levey-Jennings charts (x-charts)
•
view the detailed control data information and omit invalid control results
•
view the QC summary list
•
view the daily QC list
•
use daily statistics to establish the Daily QC mean and 1 SD (standard deviation)
values
•
print the daily x-charts
•
delete the daily QC data
•
update the QC Cumulative window
QC Cumulative window
Use this window to manage the day-to-day (cumulative) QC information.
Perform any of the following tasks at this window:
•
specify the time interval you want to review
•
view the Levey-Jennings charts (x-r charts)
•
view the detailed control data information and omit invalid control results
•
view the QC summary list
•
use cumulative statistics to establish the Daily QC mean and 1 SD values
•
print the cumulative x-r charts
•
delete the cumulative QC data