Siemens ADVIA 1800, Operator'S Manual, Page: 50 / 222

50 ADVIA 1800 Operator’s Guide
ISE Operation window
Use this window to perform various ISE tasks.
There is a display area at the top of the window where you can view the running status.
Perform any of the following tasks at this window:
•
buffer prime
•
calibration
•
wash electrode
•
CV check
•
interval check
•
selectivity check
•
final operation
•
manual operation
•
ISE line wash
•
Dilution bowl drain
•
initialize
•
batch print
•
periodic wash
•
enter information about each electrode
ISE Monitor window
Perform any of the following tasks at this window:
•
monitor and verify calibration data as a function of time, using history graphs
♦
monitor serum or urine calibrations
♦
monitor calibration trace data
♦
display data from past calibrations
♦
*monitor selectivity check data
•
print the results
•
delete calibration trace data
•
change y-axis scale
* The selectivity check must be performed under the supervision of authorized Siemens service
personnel. Please call your local technical support provider or distributor.
Manual Operation window
Perform any of the following tasks at this window:
•
operating a unit
•
activating or deactivate a unit
•
checking unit position values
BIOHAZARD
Wear personal protective equipment. Use universal precautions
.
Manual operation of units may be necessary when performing maintenance and
troubleshooting tasks.
The window contains a graphical image of the analyzer which depicts the operation you
are performing.