Siemens ADVIA 1800 Operator'S Manual Download Page 49

Page: 49 / 222

System Overview

Maintenance windows

Select

Maint.

to display the following Maintenance menu.

System Startup/Shutdown Setting window

Perform any of the following tasks at this window:

•

perform a system-assisted startup (Start set)

•

perform a system-assisted shutdown (Shutdown set)

•

perform an automatic startup (Auto start set)

User Maintenance window

Perform any of the following tasks at this window:

•

water blank measurement

•

cell blank measurement

•

batch printing

•

filing of measurement data

•

save of text file

System Monitor window

Perform any of the following tasks at this window:

•

verify operating conditions (daily procedures)

•

set the system monitor (system settings)

System Maintenance Monitor window

Perform any of the following tasks at this window:

•

enter schedules for maintenance tasks

•

monitor the maintenance status of the system

•

delete maintenance records

Lamp Energy Monitor window

Perform any of the following tasks at this window:

•

check the spectrophotometer lamp energy

•

perform offset analog to digital (AD) measurement

Summary of Contents for ADVIA 1800































































































































































































































Search results

Summary of Contents for ADVIA 1800

Reviews:

Siemens ADVIA 1800, Operator'S Manual, Page: 49 / 222

Search results

Summary of Contents for ADVIA 1800

Reviews: