Siemens ADVIA 1800, Operator'S Manual, Page: 45 / 222

System Overview 45
Reaction Monitor window
Use this window to observe changes in reaction data. The changes are depicted as a
function of time, or of the 98 detection points in an analysis.
In the window, you choose a test and a sample for which you want to display a reaction
over time. Once you make your choice, a graph is created. You can choose several plots
for the graph.
Perform any of the following tasks at this window:
•
Check test reaction data over time
•
Show the reaction data
•
Check the time courses for all wavelengths
•
Check cell blank values
•
Change the scale of absorbance graph
•
Create a file containing test data
•
Print the data list
RealTime Monitor window
Use this window to view and to print new calibration, control, and patient sample results.
Results are displayed for each sample after the sample analysis is complete.
Test Select window*
You select tests in this window for patient and control sample analysis and calibrations.
Use this window for the following tasks:
•
Disable ("down") a test.
For example, a test may be downloaded from a host system to analyzers in your lab,
but that test is not run on the ADVIA
Chemistry System.
•
To "down" a test, select one of the Test Select radio buttons, and deselect it from the
corresponding test table.
NOTE:
You can remove tests for calibrators and controls from the current run using the
Calibration and Control windows, but they stay selected for subsequent runs.
Cup/Tube Assign window*
Use this window to assign container types to each of the 84 positions in the STT sample
tray. For the current analysis, you can override the settings in the Temp cup/tube select
window.
Print Report window*
Use this window to print sample data using report layouts created in the Print Format
Settings window.
This window is only available from the supervisor logon. To print reports, go to the
Review/Edit window and using the Print Report button.