Siemens Acuson S2000 Instructions For Use Manual Download

Page: 264 / 518

Appendi x A Technical Des cription

A - 6

Instructions for Use

User-Accessible Connections

Note:

The ultrasound system does not support the U3 USB device type.



USB modem port for user or service network connectivity



USB ports on back of control panel for importing and exporting protocols, archiving, and

serviceability (quantity 2)



USB ports on left side of touch screen for importing and exporting protocols, archiving, and

serviceability (quantity 2)*



DC power socket for optional gel warmer*

*Not available for systems without a touch screen

CD/DVD Combination Drive

Note:

The DVD recordable media supported by the CD/DVD combination drive is DVD-R or

DVD-RW only. The CD/DVD combination drive does not support DVD+R or DVD+RW formatted

media.



Recordable disk (DVD) drive and hardware for storage, review, and archival of patient and

image data

Disk Media

Caution:

Use only disk media brands that have been qualified by Siemens. You may have

problems saving data to or retrieving data from disk media that has not been qualified by

Siemens.

Only use CD-Rs (recordable compact disks) or DVD-Rs (recordable digital video disks) with the

ultrasound system. The following disk media brands have been qualified by Siemens for use

with the system: JVC, Sony, TDK, Verbatim, and Maxell.

Operating Modes

Single Modes



2D-mode



M-mode



Color Doppler Velocity (CDV)



Color Doppler Energy (CDE)



Pulsed Doppler



Continuous Wave Doppler

Combined Modes



2D/M-mode



2D/Doppler



2D-mode with CDV



2D-mode with CDE



2D/M-mode with CDV



2D/M-mode with CDE



2D/Doppler with CDV



2D/Doppler with CDE

Summary of Contents for Acuson S2000







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Acuson S2000

Reviews:

Related manuals for Acuson S2000

Brands by name

Popular brands

Siemens Acuson S2000, Instructions For Use Manual

Search results

Summary of Contents for Acuson S2000

Reviews:

Related manuals for Acuson S2000

Brands by name

Popular brands