Siemens Acuson S2000 Instructions For Use Manual Download Page 238

Page: 238 / 518

10 Virtual Touch Applic ati ons

10 - 4

Instructions for Use

Virtual Touch Imaging

Use Virtual Touch imaging to qualitatively visualize tissue stiffness for a selected region of

interest.
Virtual Touch imaging supports the following transducers and exam types:



4C1 (abdominal exam)



4V1 (abdominal exam)



9L4 (breast or thyroid exam)



6C1 HD (abdominal exam)

To activate Virtual Touch imaging:

1. During 2D-mode or 2D-mode with THI active, select the control assigned to activating the

feature:

●

Press

and then select

Virtual Touch Imaging

, if necessary.

○

For systems without a touch screen, select

Virtual Touch Imaging

Virtual Touch imaging button.

The system activates a dual display format with a region of interest (ROI) box on the left

image. The right image is blank.

2. To display the full field of view:

●

Select

Full

○

For systems without a touch screen, double-click

UPDATE

Summary of Contents for Acuson S2000







































































































































































































































































































































































































































































































































Search results

Summary of Contents for Acuson S2000

Reviews:

Siemens Acuson S2000, Instructions For Use Manual, Page: 238 / 518

Search results

Summary of Contents for Acuson S2000

Reviews: