Siemens Acuson S2000, Instructions For Use Manual, Page: 126 / 518

4 E xam ination Fundam ent als
4 - 14 Instructions for Use
Changing the Exam, Transducer, Protocol, or Patient Information
During an examination, you can correct patient registration information or select a different
exam type, protocol, or transducer. If a transducer is not selected in the patient registration
form, the system activates the default transducer for the selected study type if it is connected to
the system.
Note: The study types supported by each transducer will vary.
Use the system configuration menu to customize study type selections.
System Config > Basic System 2
To Do This
Correct registration data
during an examination
Note: Images stored before you correct registration data may contain incorrect text
(such as the original, incorrect patient name).
1. Display the patient registration form.
● Press PATIENT on the control panel.
○ For systems without a touch screen, press Patient Registration on the
keyboard. Or, click Patient Registration .
The system displays the patient registration form for the current patient.
2. Click Correct .
3. Update your entries.
4. To save the changes, click
OK .
5. To exit the patient registration form without saving changes, click Cancel .
Change the exam type during
an examination
1. Display a list of the supported exam types for the selected transducer.
● Select the current exam.
○ For systems without a touch screen, click the arrow next to the current exam
type on the image menu. Or, press MENU .
2. Select the required exam type from the list.
Change the transducer
during an examination
1. Connect the required transducer to the ultrasound system, if necessary.
2. Select the transducer.
● Select the transducer name on the touch screen.
○ For systems without a touch screen, select the current transducer name on the
image menu and then select the transducer from the list.