manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 93 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 93

ACUSON

 Freestyle User Manual   

5-3

Scanning

Using the Probe

About the Probe

Probe Orientation 

The probe index marker is the side of the probe where the probe on/off symbol is located. This 

corresponds to the 

ACUSON

 “a” symbol next to the image display. The probe model numbers, 

such as “L8-3” also serve as index markers. For transducers in non-cardiac applications, the 

normal and default location of the on-screen index marker symbol is to the left of the image. 

Overview of the Probe

2

3

4

1

Controls on the probe include a slider, plus/minus keys, middle keys

1.  Back of probe
2.  Circular plus/minus keys and slider bar
3.  Probe 

middle keys

4.  Front (or “face”) of probe

NOTE: 

In wireless mode, press the two on-probe circular 

keys 

continuously to turn 

the probe on and off (see “Wireless Probe Operation” on page 5-6).

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments