manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 90 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 90

4-12         

ACUSON

 Freestyle User Manual

Patient Studies

Export Parameters

Pressing the 

EXPORT

 Soft Key opens the 

Configure Export

 list with the following fields:

 

■

Export Format

: choose an export format: 

DICOM Network

, 

DICOM Media

, 

DICOM Media 

DSF (Decompressed Single Frame)

, or 

PC Viewable

. DICOM Media and PC Viewable are 

used to store studies to a compatible USB external drive connected to the system. If no 

drive is connected, these options are not displayed.

 

■

Storage Destination

: for detailed information see the Connectivity chapter of this Manual.

 

■

Storage Commitment Destination

: for detailed information see the Connectivity chapter of 

this Manual

Editing Patient Studies

1.  Open the study list by selecting 

STUDY LIST

 from the 

SETUP

 menu.

2.  Press the 

EDIT

 Soft Key to activate the Studies page where you can edit patient 

information (name, birth date, etc.).

NOTE: 

Patient ID cannot be edited.

Deleting Patient Studies

The Delete function removes studies from the system.
1.  Open the study list by selecting 

STUDY LIST

 from the 

SETUP

 menu.

2.  Highlight a study in the Study List and press the 

DELETE

 Soft Key.

You will be prompted to confirm that you intend to delete the study before it is removed.

If you intend to archive a study to an external storage medium, do not delete the study prior to 

the archival being performed. Once a study has been deleted, it cannot be recovered from the 

system. 

CAUTION: 

Confirm that an archival operation has been successful before deleting a 

study from the system.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments