manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 71 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 71

ACUSON

 Freestyle User Manual  

3-3

Setup

System Setup and Controls

This section explains how to setup the system. The Setup Menu includes patient data entry 

functions, patient study lists, system settings, and more.

Overview of the Setup Menu

To display the list of Setup options, press the 

SETUP

 Soft Key. 

Location of 

SETUP

 Soft Key

Setup Soft Key Menu Options

Option

Description

SCAN

Activates the real-time imaging screen

PROBES

Connect and disconnect probes using this option.

SETTINGS

Manage system settings, including: 
• 

User Exam profiles 

•  Network settings
•  DICOM settings

SYSTEM

Activate the System information page that provides 

information about hardware and software configuration, and 

installed options. Includes:
•  Setting image controls
•  Patient anonymity settings
•  Administrative options
•  Contact information for service
•  Battery status

STUDY LIST

Opens the list of studies.

NEW PATIENT STUDY

Initiates data entry for a new patient study.

CLOSE STUDY

Closes the active study.

Each option is described on the following pages.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments