manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 66 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 66

2-46         

ACUSON

 Freestyle User Manual

Safety and Care

Recycling Batteries

WARNING: 

Never dispose of batteries by burning or by flushing into any waste water 

system, for example, a lavatory. Compromising the structural integrity of a battery can 

result in leakage or explosion and the potential for personal injury.

WARNING: 

Do not throw batteries into the trash. Collect and recycle used batteries 

separate from other waste.

The system does not contain alkaline batteries. Printed circuit boards may contain lithium 

batteries. If the system clock no longer keeps time, it could be time to replace the battery. 

Contact your local Siemens representative.
Recycle batteries according to local, state, and regional regulations. Use a battery collection 

program available in your country to recycle batteries.
To the extent required by local laws and regulations, Siemens will collect and recycle batteries 

for this product at no charge. Contact your local Siemens representative for battery shipment 

instructions.

Disposing of the Packaging Materials

Dispose of or recycle the packaging materials according to local, state, and regional 

regulations.
To the extent required by local laws and regulations, Siemens will collect and dispose of 

packaging materials for this product. For more information, contact your local Siemens 

representative.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments