manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 134 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 134

8-8         

ACUSON

 Freestyle User Manual

Connectivity

Configuring a DICOM Storage Commitment Server

To configure a DICOM Storage Commitment Server:
1. 

Go to 

SETUP

 / 

SETTINGS

 / 

DICOM

 / 

STORAGE COMMITMENT

.

2. 

Select 

NEW

.

3.  Enter the DICOM Storage Commitment information as described in the following table.

DICOM Storage Commitment Fields

Field

Description

Alias

Name you define for the Storage Commitment Server.
Limited to 16 characters.

IP Address

The IP address of the Storage Commitment Server.

AE Title

Identifies the server application that receives storage commitment 

messages from the 

ACUSON

 Freestyle. The alphanumeric characters 

entered in this field must exactly match (including case) the 

Application 

Entity

 name assigned to the server application.

Limited to 16 characters; cannot include the period (“.”) character.

Port Number

The remote port on the server that is to receive the storage 

commitment messages. 
The default is port 104.

Test

Used to test the connection once you have entered the configuration 

data. You can test using either Ping or C-Echo (DICOM Verify). Ping 

tests the connection across the network; C-Echo additionally tests that 

the DICOM server is active. 
For security reasons, some network and network servers are set up 

not to respond to Ping or C-Echo commands. Check with your IT 

department or PACS Administrator to determine how your network 

handles these functions.

NOTE: 

If you enable Storage Commitment but your DICOM server does not support 

this feature, the system will not perform the Storage Commitment function. 

It can take several minutes for the Storage Commitment Server to respond to a storage 

commitment request. During that time, any other transfers that have been lined up will 

continue. 

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments