manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 131 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 131

ACUSON

 Freestyle User Manual   

8-5

Connectivity

Configuring the WiFi Network

WiFi Network Configuration Fields

Network Field

Description

Network Name

Unique name to identify the network in the Network List.

Network Type

Select either Infrastructure or Adhoc. 

• 

Infrastructure

 uses central access points such as routers for 

communication. 

• 

Adhoc

 allows wireless devices to communicate in a peer-to-

peer fashion. 

Security

Use the drop-down menu to select the security method used 

by the WiFi network. See the Safety chapter of this Manual for 

information about 802.11 b/g security.
Use the data entry fields in the security box to enter security 

data. To import Enterprise WiFi Certificate data, select 

IMPORT 

CERTIFICATE

. Copy the certificate to a USB drive, then plug the 

USB drive into the Freestyle. Select the certificate file name and 

press 

OK

 to import the certificate.

IP Address

When checked allows the system to automatically obtain an IP 

Address.

[OK]

Saves the settings for the network.

[Cancel]

Closes the menu without saving settings.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments