manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 129 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 129

ACUSON

 Freestyle User Manual   

8-3

Connectivity

Overview of Connectivity

The 

ACUSON

 Freestyle includes the DICOM (Digital Imaging and Communications in Medicine) 

networking capability. DICOM communications comply with the DICOM standard and provide 

links between the system and DICOM picture archival systems (PACS), modality worklist 

servers, and storage commitment servers. 
Consult with your PACS Administrator when using the DICOM features of the 

ACUSON

 

Freestyle.

NOTE: 

Confirm compatibility between your DICOM PACS system and the 

ACUSON

 

Freestyle before archiving from the 

ACUSON

 Freestyle to the PACS system.

System configuration for connectivity are usually carried out by your organization’s network or 

PACS Administrators. 
Connectivity features may be options which are not provided on every system. 

Configuring the Network Settings

To configure your system for connectivity, go to 

SETUP

 / 

SETTINGS

 / 

NETWORK

. This takes you 

to the Network page.

Ethernet Setup

This defines the network identification of the system, using the IP address, Subnet Mask and 

Gateway to give the 

ACUSON

 Freestyle a unique identifier on a specific network.

Check the 

Auto IP Enabled

 box to enable the IP address to be assigned on startup. 

Ethernet Network Configuration Fields

Network Field

Description

IP Address

When checked allows the system to automatically obtain an IP 

Address.

Auto IP Enabled

Automated IP address assignment.

Subnet Mask

IP address formatting.

Gateway

Network access point.

[OK]

Saves the settings for the network.

[Cancel]

Closes the menu without saving settings.

To edit the IP Address, Subnet Mask, or Gateway, click on the typewriter symbol next to the 

field.

NOTE: 

The MAC address displayed cannot be edited.

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments