manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 123 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 123

ACUSON

 Freestyle User Manual   

7-3

Batteries

Overview of the Probe Battery

WARNING: 

Read the Safety Chapter of this manual for important information regarding 

safe operation of the ACUSON Freestyle batteries. 

WARNING: 

To avoid the risk of electrical shock, do not insert the battery pack into probe 

or charger bays unless the battery pack, probe, or charger bays are dry and free of 

liquids. 

CAUTION: 

Verify that the probe battery pack and either the probe battery receptacle or 

the System charging bays are free of any liquid, gels, or contaminants before inserting 

the battery. Inserting a battery into the probe or charger bays when liquid, gel, or 

contaminants could cause harm to the probe and/or system.

2

3

 

1

The probe battery is recharged in the charging bays at the rear of the 

System Console; when charged, return it to the probe

1.  Probe charging bays
2.  Probe battery
3.  Probe

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments