manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 118 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 118

6-10         

ACUSON

 Freestyle User Manual

Wireless Probes

Wireless Noise Examples

B-Mode Wireless Noise

In B-Mode, if the wireless signal quality is compromised, noise may occur as shown in the 

simulated image below. If you experience such noise, reposition to improve the link quality. 

 

B-Mode wireless noise (simulated image)

Reasons for a Low Wireless Signal in B-Mode

 

■

The probe is too far away from the console

 

■

The probe is out of a line-of-sight to the console

 

■

There is an obstruction between the probe antennas and the console antennas

 

■

Some combination of these

Color Flow Wireless Noise

In Color Flow Doppler mode, if the wireless signal quality is compromised, excess background 

noise, as demonstrated in the simulated phantom flow image here may occur. If you experience 

such noise, reposition to improve the link quality. 

Color Flow Doppler wireless noise (simulated image)

Reasons for a Low Wireless Signal in Color Flow

 

■

The probe is too far away from the console

 

■

The probe is out of a line-of-sight to the console

 

■

There is an obstruction between the probe antennas and the console antennas

 

■

Some combination of these

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments