manualshive.com logo in svg

Siemens ACUSON Freestyle, User Manual, Page: 103 / 138

Share
Download
Siemens ACUSON Freestyle User Manual Download Page 103

ACUSON

 Freestyle User Manual   

5-13

Scanning

B-Mode Scanning

The default scanning mode for the system is B-Mode. 

NOTE: 

Functions listed in the Tools menu will vary depending on how the System 

Administration / User Selected Keys are configured.

B-Mode Tools

The real-time Control Bar Tools Soft Key displays a number of secondary-level real-time 

imaging-related controls. The active Tools items will vary according to the scanning mode. 
Press the 

Tools

 button to display the Tools options. When this list is active, the Rotary knobs 

will control interaction with the list. Use the knobs in the same manner as is used to control the 

real-time control bar. The outer knob moves up and down the list and the inner knob adjusts 

the value or state for individual items. 

B-Mode Tools Sub-Menu

B-Mode Tools Sub-Menu

Description

Exit Tools

Exits the 

Tools

 sub-menu.

PostProc

Post Processing

. Adjusts the gray scale curves of the B-mode 

image. Lower values will have softer appearance, higher values will 

have a more “contrasty” appearance. 
Displayed in the on-screen settings window as 

PP

.

Dyn . Range

Image Dynamic Range

. Displayed in decibels (dB). 

Displayed in the on-screen settings window as numerical units 

followed by 

dB

.

Compound

Spatial Compounding

. Selects different levels of spatial 

compounding. Spatial compounding combines different scan steering 

angles to improve image quality. 
Displayed in the on-screen settings window as 

SC

.

Speckle

Speckle Filter

. Applies image filters that remove speckle or enhance 

edges. In general, higher values will apply more filtering for potentially 

smoother image appearance. 
Displayed in the on-screen settings window as 

SF

.

L/R Reverse

Left/Right Reverse

. This switches the orientation of the image on the 

screen so that the index marker symbol display is moved from the left 

of the image to the right of the image. 

M-Line

Displays a dotted line through the middle of the image with depth 

markers.

Needle Visualization

Improves the display of needles during procedures. See below for 

details.

Wide

Widens the image of linear probes.

  

Summary of Contents for ACUSON Freestyle











































































































































Reviews:

No comments