ACUSON Cypress™ Operator’s Manual
3-17
The System Menu
TABLE 5.
System Menu Fields
Field
Description
Transducers
Double-click
Transducers
to display a list of com-
patible transducers. Highlight each transducer and
use the pull-down menu on the right side to select a
default protocol.
Setting a Default Protocol for Transducers
A default protocol is assigned to each transducer by
the manufacturer and can be redefined by the user.
The default protocol should be the protocol that is
used most often for each transducer. To select a dif-
ferent default protocol, follow these steps:
1.
Press
SETUP
, double-click
System
, and then
double-click
Transducers
.
2.
Highlight a transducer (for example, AcuNav) and
select a default protocol from the pull-down menu
at the right of the screen.
3.
Continue until each transducer has been
assigned a default protocol.
Options
Highlight
Options
to display the following informa-
tion:
Enable Password Modification
Click the check-
box to enter a new password.
Password
Passwords are issued by Siemens.
Passwords are unique to each Cypress system
and cannot be transferred. Do not delete an exist-
ing password until a new password has been
issued.
Enabled
The window shows the options that are
enabled for this system.
Ethernet Address
Factory set and cannot be
changed. This address is used to identify the
Cypress system when new passwords are issued.
Service Information
Stores service information
.
Put the cursor in the field and then enter the name
and phone number of your service representative.
