ACUSON Cypress™ Operator’s Manual
1-7
Setting Up User Accounts
Setting Up User Accounts
Any valid User Account can be granted “Administrator” privileges. Administra-
tors can set and change defaults using the Setup User Account options:
Add/edit/remove users
Change user passwords
Enable/disable administrator privileges for a user account
Change logon screen text
Set the auto-logout time-out value
NOTE: When the Cypress system is shipped from the factory, the default
setting is that User Accounts are not enabled.
NOTE: When the User Accounts feature is not enabled, every user is con-
sidered an “administrator.“
Adding Users
To enable the User Accounts feature and add users, follow these steps:
1.
Press the
SETUP
key.
2.
Highlight the
User Accounts
option.
3.
On the right side of the screen click the
Require User Logon
box to enable
User Accounts.
4.
If desired, type in a
Logon Message
. The Logon Message will appear at the
top of the Logon box. For example, it can be a welcoming message like
“Hello, please Log on” or it can specify an emergency logon: "For Emer-
gency Logon enter User=Hospital, Password=Echo.
5.
Type in a User
Name
for the user. Note that User Names are not case sensi-
tive and can be up to 64 characters.
6.
Type in the Password twice. Note that Passwords
are
case sensitive and can
be up to 64 characters.
7.
The first user account that is created will automatically become an adminis-
trator. Additional user accounts can also be given administrator privileges (by
this administrator). To give other users administrator privileges, click the
Administrator
box.
8.
To add the user, click the [
ADD
] button.
9.
If the Password is forgotten or log on is not successful, call the Help Desk at:
1-800-888-SIEM.
